The Evo is a last generation hybrid paramotor wing designed for pilots dreaming flying a high safe wing and a top trim speed for long cruising. We have created a wing with a hybrid profile with the safety of the free flying winds aimed for the intermediate recreational pilots.

The Evo has been developed from zero to achieve an ultra-fast and safe wing responding the multiple demands of the PPG pilot. This is a easy launch with nil wind conditions and and a high safety flying in turbulence. The double leading edge, S.A.S. system improves the canopy take off behavior and at high speed the airflow around the profile is highly improved.

	S.A.S system in the leading edge making possible high speed at a low angle of attack. Hybrid profile making possible the free flight and the motor flight with complete safety.
Special short risers and a long trim for specific motor use. The foot accelerator is also included to use in free flight and turbulent air. The overall construction is reinforced and very durable, with stronger seams than usual and thicker liner for higher loads. EN load test certification up to 12 G

More Photos

Option of double hook up points for High or low hang points

size	23	25	27	30
area (m2)	24.10	25.80	27.70	30.10
projected area (m2)	21.27	22.75	24.40	26.70
span (m)	11.12	11.50	11.85	12.49
projected span (m)	9.22	9.55	9.86	10.40
aspect ratio	5.2	5.2	5.2	5.2
projected aspect ratio	4.1	4.1	4.1	4.1
max chord (m)	2.70	2.80	2.91	3.04
min chord (m)	0.61	0.63	0.65	0.68
nº cells	52	52	52	52
line length (m)	6.71	6.94	7.20	7.55
all-up weight (kg)	60-120	70-130	85-145	100-165
min-max speed* (km/h)	22-60+	22-60+	22-60+	22-60+
EN certification	load test	load test	load test	load test
* speeds taken with pilot in middle of the weight range and standard lines at sea level.

construction

 

cloth:	Nylon Porcher Marine Skytex Evolution Top surface: 44 g/m2 Bottom surface: 40 g/m2
ribs:	Nylon Porcher Marine Skytex 50 g/m2
rib reinforcement:	Dacrón 180 g/m2
trailing edge reinforcement:	Polyester 175 g/m2
lines:	Sheathed Kevlar Kevlar 2.2/1.7 mm
maillons (quick links):	Stainless steel 4 mm
risers:	Polyamida-kevlar 25 mm

Certified EN with paramotor-specific load testing